Live leak correction on process equipment at full pressure, temperature and production. No shutdowns. No lost output.
HERBERT technology is proven across the full range of process-plant services, from inert to highly hazardous fluids.
Saturated and superheated steam, hydrocarbons, acids and alkalis, gases and liquid chemicals.
Sealed while the system runs at full pressure, temperature and production.
More than 300 products successfully sealed: steam, air, boiler feed water, oils, hydrocarbons, natural gas, solvents, ketones, aldehydes and heat-transfer fluids.
Full fabrication and installation of clamps and enclosures, with design engineering and calculation packages for every device.
Compound injection on flanges, glands and valve seats, with no shutdown.
Clamps, wire wrap, insert wire and drill & tap for flanges and equipment.
The most common leak, repaired live with the valve operational.
Ball, plug, gate, globe and pressure-seal valves.
Enclose the defect and restore integrity on pipes and fittings.
Carbon-fibre reinforcement, with no hot work.
A do-it-right-from-the-start philosophy. Nearly every leak-sealing technique in use today was developed by HERBERT.
24/7/365 emergency response. Technical support to assess the best repair method for your case.
